Mouvex compressors for discharging silo and tank trailers
Discharging cement, flour, feed, granulates or liquids? We install the Mouvex compressor that suits the product and the gearbox of your tractor unit, service it and supply parts from stock.
* Manufacturer data (Mouvex data sheets). ** PFS’s own statement, published on flowsolutions.hu/rolunk/.
What do you need to discharge?
Choosing a compressor starts with the product transported: powders need a high-delivery, oil-free screw compressor, heat-sensitive food needs air cooling, and liquids need a lightweight, corrosion-resistant liquid compressor.
Cement, sand, building materials
Gearbox-mounted or PTO shaft-driven screw compressor with low weight.
Flour, sugar, food powders
Oil-free air, with an aftercooler to protect heat-sensitive products.
Animal feed
High air delivery, chassis-mounted, also for 6×2 tractor units.
Plastic granulates
Up to 1,130 m³/h, in air-cooled and suction-pressure versions.
Liquid food
Oil-free air, mounted directly on the PTO.
Chemical liquids, bitumen, fertiliser
Corrosion-resistant screw or vane compressor, also with hydraulic drive.
Mouvex compressors and drive systems
For powder discharge there are five screw compressor families, from the gearbox-mounted MH6 to the 1,130 m³/h Typhon II and MX12; for liquid tanks the B200 screw compressor and the Enterprise vane compressor; and for hydraulic drive the Hydrive cooler and tank unit.
MH6
Directly on the gearbox, without a PTO shaft
Together with the Hydrocar PTO module, the compressor is mounted directly on the gearbox, so no PTO shaft, mounting bracket or separate torque limiter is needed. A compact, lightweight and quiet system for discharging cement and building powders; with an aftercooler it can also be used for food powders.
| Air delivery | max. 600 m³/h |
|---|---|
| Max. pressure | 2.5 bar |
| Weight | 30 + 16 = 46 kg (compressor + PTO module) |
| Dimensions | L 604 × H 358 × W 280 mm |
| Compatible with | DAF, IVECO, MAN (ZF), Mercedes-Benz, Renault Trucks, Volvo, Scania |
| Chassis | 4×2 short chassis, 6×2, 6×4; also for LNG-powered vehicles |
Optional equipment (selection)
- aftercooler (MH6 InterCooler) for food powders
- oil cooler
- noise reduction kit
- breather kit for ZF AS-Tronic gearbox
Typical tasks: cement, sand, lime, building powders; with an aftercooler, flour and granulated sugar.
Detailed product data sheetMistral
365–750 m³/h, driven by a PTO shaft
A universal screw compressor for powder discharge that can be mounted inside the chassis frame. The version driven from the PTO via a shaft comes in several variants matched to the speed, including geared (multiplier) versions for lower input speeds. With an aftercooler for flour and sugar, and with an oil cooler for several discharges a day.
| Air delivery | 365–750 m³/h |
|---|---|
| Max. pressure | 2.5 bar |
| Versions | 20R, 30R; geared: 13R/15L, 19R/22L |
| Speed | 780–3,000 rpm (depending on version) |
| Weight | 115 kg (20R/30R), 145 kg (geared) |
| Dimensions | L 587 × H 355 × W 280 mm (20R/30R) |
Optional equipment (selection)
- aftercooler for heat-sensitive products
- oil cooler for continuous operation
- air filter with cyclone pre-filter
- clockwise (CW) or counter-clockwise (CCW) rotation
Typical tasks: discharging cement, flour, granulated sugar, starch and feed from silo trailers.
Detailed product data sheetTyphon II
600–1,130 m³/h, pressure and suction-pressure versions
A high-delivery screw compressor for mounting inside the chassis frame, designed for international silo transport. Available in N (pressure) and SP (suction and pressure) versions, so it is also suitable for vacuum loading. The air-cooled (InterCooler) version is for heat-sensitive granulates and food.
| Air delivery | 600–1 130 m³/h |
|---|---|
| Max. pressure | 2.5 bar |
| Suction side | down to –800 mbar in the SP version (data sheet torque table) |
| Versions | 20R, 30R; geared: 13R/15L, 19R/22L |
| Weight | 143 kg (20R/30R), 173 kg (geared) |
| Dimensions | L 664 × H 362 × W 280 mm (20R/30R) |
Optional equipment (selection)
- aftercooler (InterCooler)
- SP suction-pressure version
- oil cooler
- clockwise (CW) or counter-clockwise (CCW) rotation
Typical tasks: plastic granulates, feed, food and building powders.
Detailed product data sheetMX12
Max. 1,130 m³/h, 110 kg, also for 6×2 tractor units
A lighter and more compact screw compressor built on the reliability of the Typhon II. Its modular design makes it easy to repair and upgrade, and the smaller shaft angle and lower input speed protect the driveline and reduce fuel consumption. Mounted inside the chassis frame, it also fits 6×2 tractor units.
| Air delivery | max. 1,130 m³/h |
|---|---|
| Max. pressure | 2.5 bar (performance curve) |
| Weight | 110 kg (the lightest in its class according to the manufacturer) |
| S version (from the PTO) | 15R–20R clockwise, 18L–24L counter-clockwise |
| N version (from an external engine) | 18R–24R clockwise, 15L–20L counter-clockwise |
Optional equipment (selection)
- aftercooler (MX-12 IC)
- oil cooler for several discharges a day
- Donaldson PowerCore air filter
Typical tasks: plastic granulates, feed, grain, lime, gravel; with an aftercooler, flour.
Detailed product data sheetB200
26.5 kg, mounted directly on the PTO
A screw compressor designed for pressure discharge of liquids that mounts directly on the PTO flange: no mounting bracket and no PTO shaft. It delivers corrosion-resistant, oil- and particle-free air, so it can be used for both food and chemical liquids; it can also be driven by an electric or hydraulic motor.
| Application | discharging liquids, up to max. 180 m³/h |
|---|---|
| Pressure | 1.5–2.5 bar (data sheet torque table) |
| Weight | 26.5 kg |
| Dimensions | L 402 × H 218 × W 129 mm |
| Versions | B 200-10L (1,000 rpm), B 200-12R (1,200 rpm) |
| Drive | PF: PTO flange, PS: shaft for electric motor, HY: hydraulic |
Optional equipment (selection)
- Flow Control check and safety valve
- aftercooler for low-temperature discharge
- hydraulic drive (HY)
Typical tasks: liquid food, bitumen, molasses, fats, liquid fertiliser, acids, solvents.
Detailed product data sheetEnterprise E140 / E170
140 / 170 m³/h, hard-coated cast iron housing
A vane compressor series for discharging liquid tanks, developed by Hammond and Mouvex together. The housing and rotor are made of hard-coated cast iron, and the compressor and valve are fully protected against corrosion. It can be driven from the PTO via a shaft or by a hydraulic motor; the vanes can be replaced during maintenance.
| Air delivery | 140 m³/h (E140) / 170 m³/h (E170) |
|---|---|
| Max. continuous pressure | 2.5 bar (E140) / 2.0 bar (E170) |
| Power consumption | 8.4 kW / 10.2 kW (1,500 rpm, at max. pressure) |
| Max. speed | 1,750 / 1,600 rpm |
| Weight | 36 kg / 47 kg |
Optional equipment (selection)
- check and safety valve (standard)
- extended inlet pipe kit (standard)
- inlet filter
- hydraulic motor drive with adapter
- Hydrive hydraulic cooler
Typical tasks: liquid fertiliser, hydrochloric acid, crude and refined oil, bitumen, other chemical liquids.
Detailed product data sheetHydrive 2010 / 2020
For the hydraulic drive of compressors and pumps
When a compressor or pump is driven by a hydraulic motor, the Hydrive combines the oil tank, oil cooler and safety valve in one compact stainless steel unit. It works with little oil and low weight and fits in a small space on the chassis; a pressure gauge shows when the filter needs changing.
| Oil flow | 55–120 l/min (2010) / 55–200 l/min (2020) |
|---|---|
| Circuit pressure | 50–280 bar |
| Cooling capacity | 10 kW (2010) / 20 kW (2020) |
| Oil tank | 10 l / 17 l |
| Weight (dry) | 24 kg / 35 kg |
Optional equipment (selection)
- complete hydraulic system
- hydraulic motor adapter for Mouvex compressors and pumps
Typical tasks: hydraulic drive of liquid compressors, pumps, vacuum compressors and moving floors.
Detailed product data sheetLet’s talk about your task!
With just a few details we can tell you which configuration is economical and what to look out for when purchasing.
Oil-free compressed air, low weight, many drive options
Mouvex screw compressors work with non-contacting rotors and oil- and particle-free air, so the product is not contaminated. The drive can be matched to the vehicle: mounted directly on the gearbox or the PTO, with a PTO shaft or with a hydraulic motor.
Oil- and particle-free air
The rotors of the screw compressors turn without contact and the compressed air is oil- and particle-free, so it can also be used for food powders and liquid food (Mistral, MH6, B200).
A drive for every vehicle
Directly on the gearbox (MH6), on the PTO flange (B200), via a shaft from the PTO (Mistral, Typhon II, MX12, Enterprise) or with a hydraulic motor (B200 HY, Enterprise, Hydrive).
Low weight, more payload
According to the manufacturer’s data sheets, the MH6 compressor and PTO module together weigh 46 kg, the B200 26.5 kg and the MX12 110 kg.
Air cooling for heat-sensitive products
Air-cooled (InterCooler) versions in the Typhon II, MX12 and MH6 families: for discharging flour, sugar and heat-sensitive granulates.
Pressure and suction-pressure operation
The SP version of the Typhon II works down to –800 mbar on the suction side, making it suitable for both vacuum loading and pressure discharge.
Hydraulic drive in one unit
The Hydrive combines oil tank, oil cooler and safety valve: 10 or 20 kW cooling capacity, 50–280 bar, 24 or 35 kg dry weight.
Source: Mouvex / PSG manufacturer data (mouvex.com, psgdover.com).
Local support from selection to operation
Premium Flow Solutions Kft. is the exclusive distributor of Mouvex compressor systems in Hungary; according to its own figures, PFS fits 8 out of every 10 compressor trucks in Hungary. We offer compressor PTOs for every gearbox, carry out repairs with factory technology and genuine parts, and keep compressors and wear parts in stock at all times.
Our other brands
Factory data sheets on request
We will send you the factory data sheet, performance curve and installation dimensions of the selected Mouvex compressor. Tell us what you discharge and which tractor unit and gearbox you use.
Ask our experts!
Endre Füri, head of purchasing and parts sales at PFS, helps you choose the Mouvex compressor and drive that suit the product and the tractor unit, and handles the procurement of genuine parts.
Endre Füri
We help you choose the configuration that suits the task and guide you through the purchase from quote to handover.
+36 70 770 9828Mouvex products in brief
Which Mouvex compressor is right for cement transport?
For cement and building powders, typically the MH6 or the Mistral. The MH6 mounts directly on the gearbox without a PTO shaft, and the compressor and PTO module together weigh 46 kg; the Mistral is chassis-mounted, shaft-driven and delivers 365–750 m³/h.
What compressor do I need for flour or sugar?
For heat-sensitive food powders, an oil-free screw compressor with an aftercooler: the Mistral with aftercooler or the MH6 InterCooler version. The aftercooler lowers the outlet air temperature so the product does not overheat.
What is the difference between the Typhon II and the MX12?
Both are chassis-mounted screw compressors with a max. air delivery of 1,130 m³/h. The MX12 is based on the Typhon II but is lighter (110 kg) and modular, works with a smaller shaft angle and lower input speed, and can also be fitted to a 6×2 tractor unit.
What compressor do I need for a liquid tank?
For food and chemical liquids, the B200 screw compressor (26.5 kg, mounted directly on the PTO, up to 180 m³/h for liquids); for chemical liquids where oil-free air is not required, the Enterprise E140/E170 vane compressor (140/170 m³/h).
Can the compressor be fitted to any tractor unit?
PFS offers compressor PTOs for every gearbox. According to the manufacturer, the MH6 fits DAF, IVECO, MAN (ZF), Mercedes-Benz, Renault Trucks, Volvo and Scania vehicles, including 4×2 short-chassis, 6×2 and 6×4 tractor units, and the MX12 can be mounted inside the chassis frame of a 6×2 tractor unit.
When is a hydraulic drive the right choice?
If the compressor or pump cannot be driven directly from the PTO, or if the vehicle has several hydraulic consumers. The Mouvex Hydrive provides the oil tank, cooler and safety valve in one unit, with 10 or 20 kW cooling capacity.
Are Mouvex parts and service available in Hungary?
Yes. PFS carries out repairs with factory technology and genuine Mouvex parts, and keeps compressors and wear parts (MX12, Typhon, B600, Mistral, MH6, B200, DDIC and Hydrive parts) in stock in Ercsi at all times. Parts: Endre Füri, +36 70 770 9828.
Where can I buy a Mouvex compressor in Hungary?
The exclusive distributor of Mouvex compressor systems in Hungary is Premium Flow Solutions Kft. (Ipari Park 2859 hrsz., 2451 Ercsi, next to the M6), which also installs and services the compressors. Contact: Endre Füri, +36 70 770 9828, endre.furi@flowsolutions.hu.
The technical data on this page are taken from Mouvex manufacturer data sheets; the final values depend on the selected version and drive. The “8 / 10” ratio is PFS’s own statement. The Mouvex name and logo are trademarks of the manufacturer.