Heavy-duty truck-mounted cranes: 80–180 t
80, 100 and 180 t truck-mounted cranes on 4-axle chassis. Without counterweight the base machine weighs 32 t, so according to the manufacturer it can travel on roads and motorways without a special permit; the self-installing counterweight is transported separately.
Marchetti MTK 180L
Top of the range: 180 t, 400 tm, on a 4-axle chassis
Marchetti’s largest truck-mounted crane, with a six-section telescopic boom on a 4-axle (8×4) truck chassis. The modular 15.9 t counterweight is lifted into place by hydraulic cylinders controlled from the crane cab, and the four radial outriggers can be operated from the cab and from both sides of the chassis. Without counterweight the base machine has a gross vehicle weight of 32 t; the counterweight is transported separately.
| Max. lifting capacity | 180 t (at 2 m) |
|---|---|
| Max. load moment | 400 tm |
| Telescopic boom | 7.9–36.3 m, 6 sections |
| Max. lifting height | 40 m |
| With jib | 53 m (lattice jib 7.1 / 13 m, 0°/20°/40°) |
| Max. working radius | 34 m, 40 m with jib |
| Outrigger base (max.) | 7,6 × 7,0 m |
| Counterweight | 15.9 t, modular, self-installing |
| Chassis | 4-axle (8×4) truck |
| Gross vehicle weight | 32 t (base machine, without counterweight) |
Optional equipment (selection)
- lattice jib (7.1 / 13 m)
- 80 t hook block with 5 sheaves
- 4.3 t additional counterweight
- outrigger control from the cab and from both sides of the chassis
Typical tasks: lifting and installing heavy machine components, precast concrete elements, steel structures and industrial equipment.
Marchetti MTK 1005II
100 t lifting capacity, 32 t base machine
100 t truck-mounted crane with a six-section telescopic boom on a 4-axle chassis. Without counterweight the base machine weighs 32 t, so according to the manufacturer it can travel on roads and motorways without a special permit; the self-installing counterweight is transported separately. The working area limiter (WAL) and the carrier drive can also be operated from the crane cab, and with partial outrigger extension it can work in confined spaces.
| Max. lifting capacity | 100 t (at 2 m) |
|---|---|
| Max. load moment | 255 tm |
| Telescopic boom | 7.1–31.5 m, 6 sections |
| Max. lifting height | 34 m |
| With jib | 46 m (lattice jib 6.9 / 12 m) |
| Max. working radius | 28 m, 40 m with jib |
| Outrigger base (max.) | 7,1 × 6,4 m |
| Partial outrigger base | 4,75 × 4,2 m |
| Counterweight | 8.4 t (2 pieces), self-installing; 11 t optional |
| Chassis | 4-axle (8×4) truck |
| Gross vehicle weight | 32 t (base machine, without counterweight) |
Optional equipment (selection)
- lattice jib (6.9 / 12 m, 0°/20°/40°)
- 11 t counterweight (3 pieces)
- working area limiter (WAL) and carrier drive from the crane cab
Typical tasks: construction assembly, machinery moving, lifting roof structures and building services units, even on confined sites.
Marchetti MTK 1006
Seven-section 40 m boom, 55.5 m lifting height
80 t truck-mounted crane with a seven-section 40 m telescopic boom on a 4-axle chassis. The 80 t applies over the rear; the 360° capacity is 70 t. With the jib it reaches a lifting height of 55.5 m. Without counterweight the base machine weighs 32 t, so according to the manufacturer it can travel without a special permit; the self-installing counterweight is transported separately.
| Max. lifting capacity | 80 t over the rear (at 2.5 m); 70 t over 360° |
|---|---|
| Max. load moment | 210 tm |
| Telescopic boom | 7.7–40 m, 7 sections |
| Max. lifting height | 42,5 m |
| With jib | 55.5 m (lattice jib 7.1 / 13 m, 0°/20°/40°) |
| Max. working radius | 36 m, approx. 46 m with jib |
| Outrigger base (max.) | 7,1 × 6,4 m |
| Partial outrigger base | 4,75 × 4,2 m |
| Counterweight | 8 t (2 pieces), self-installing |
| Chassis | 4-axle (8×4) truck |
| Gross vehicle weight | 32 t (base machine, without counterweight) |
Optional equipment (selection)
- lattice jib (7.1 / 13 m, 0°/20°/40°)
Typical tasks: erecting tall buildings, hall structures and towers, where height and working radius matter more than maximum weight.
How heavy, and how high?
Based on the weight of your heaviest lift and the required height and working radius, we tell you which Marchetti model and which chassis suit the job.
What to know before choosing
Can a 100-tonne truck-mounted crane travel without a route permit?
Without counterweight, the base machines of the MTK 1005II, MTK 1006 and MTK 180L have a gross vehicle weight of 32 t; according to the manufacturer they can therefore travel on roads and motorways without a special permit, with the counterweight transported separately. In Hungary the maximum permissible gross weight of a 4-axle vehicle is also 32 t; in our quotation we verify the axle loads and dimensions for the specific chassis.
What is the difference between the MTK 1006 and the MTK 1005II?
The MTK 1005II lifts 100 t, with a 31.5 m boom, 46 m lifting height (with jib) and a max. working radius of 28 m; the MTK 1006 lifts 80 t (70 t over 360°) but has a 40 m boom, 55.5 m lifting height and a 36 m working radius. For heavier loads choose the 1005II; for greater height and radius, the 1006.
How is the counterweight fitted?
The counterweight is self-installing: the 8.4 t counterweight of the MTK 1005II, the 8 t of the MTK 1006 and the 15.9 t of the MTK 180L are lifted into place by hydraulic cylinders controlled from the crane cab, without an assist crane. On the road the counterweight is transported separately.
How much space do the outriggers need?
The maximum outrigger base is 7.1 × 6.4 m for the MTK 1005II and MTK 1006, and 7.6 × 7.0 m for the MTK 180L. The MTK 1005II and MTK 1006 can also work with a partial 4.75 × 4.2 m outrigger base, at reduced capacity.
Which chassis can it be mounted on?
The heavy-duty models are mounted on 4-axle (8×4) truck chassis; the manufacturer names IVECO, Volvo, Scania, MAN, Astra and Mercedes-Benz chassis. PFS recommends the chassis based on the service network available in Hungary and the applicable regulations.
Let’s talk about your task!
Péter Vlcskó, Managing Director and owner of PFS, helps you choose the right model and chassis for the job, schedules the body building and commissioning, and supports you through the purchase from quotation to handover.
Péter Vlcskó
Based on the lifting task, the site and the preferred chassis, we provide a configuration proposal and a quotation, and we organise the body building, commissioning and service.
+36 70 615 1906
Our other brands
The technical data on this page are manufacturer data from Marchetti Autogru S.p.A.; lifting capacity depends on boom length, working radius, outrigger base and counterweight, and the manufacturer’s load chart is always authoritative. Gross vehicle weight and axle loads depend on the chassis and configuration. The Marchetti name and logo are trademarks of their owner; vehicle brand names are mentioned only to indicate compatibility.